登录    注册    忘记密码

详细信息

Tribocorrosion Properties of TiSiN/Ag Nano-Multilayer Coatings in Seawater  ( EI收录)  

文献类型:期刊文献

中文题名:TiSiN/Ag

英文题名:Tribocorrosion Properties of TiSiN/Ag Nano-Multilayer Coatings in Seawater

作者:Shan, Lei[1,2]; Yang, Jiangxin[1]; Wu, Fuzhong[2]; Li, Jinlong[3]; Wang, Yongxin[3]

机构:[1] State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, Zhejiang, 310058, China; [2] Shaoxing University, School of Mechanical and Electrical Engineering, Shaoxing, Zhejiang, 312000, China; [3] Key Laboratory of Marine Materials and Related Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, Zhejiang, 315201, China

年份:2020

卷号:40

期号:1

起止页码:60

外文期刊名:Mocaxue Xuebao/Tribology

收录:EI(收录号:20201308363486)

语种:英文

外文关键词:Aluminum alloys - Aluminum metallography - Friction - Metallic matrix composites - Multilayers - Nanocrystals - Scanning electron microscopy - Seawater - Seawater corrosion - Silicon - Silver - Ternary alloys - Titanium alloys - Titanium nitride - Vanadium alloys - Vanadium metallography - Wear of materials - X ray photoelectron spectroscopy

外文摘要:The TiSiN/Ag nano-multilayer coatings were deposited on Ti-6Al-4V alloy by multi-arc ion plating system. The composition and structure of the coating were characterized using X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy, and the hardness was tested using nanoindentation. The friction and wear properties of the coating were tested by Rtec MFT500 tribometer in seawater. The results showed that the coating had a dense structure and a clear multi-layer interface. The TiSiN layer and the Ag layer were alternately deposited. The coating contained TiN, Ag and Si3N4 phases, and the amorphous Si3N4 encapsulates the nanocrystalline TiN. Compared with Ti-6Al-4V alloy matrix, after deposition of TiSiN/Ag nano-multilayer coating, the friction coefficient was reduced by more than 0.15 in both atmospheric and seawater environments, and the wear rate was reduced by two orders of magnitude. Corrosion-friction interaction occurred in artificial seawater. The main loss was due to the synergistic effect of corrosion and friction. The tribocorrosion resistance of the coating was much better than that of the Ti-6Al-4V alloy. ? 2020, Science Press. All right reserved.

参考文献:

正在载入数据...

版权所有©绍兴文理学院 重庆维普资讯有限公司 渝B2-20050021-8
渝公网安备 50019002500408号 违法和不良信息举报中心