文献类型：期刊文献

中文题名：玻璃纤维增强PP熔喷无纺布复合面料的开发

英文题名：Development of glass fiber reinforced PP melt blown nonwoven composite fabric

作者：陈海英[1];张才前[1];苏张芸[1];施晨艳[1]

机构：[1]绍兴文理学院元培学院

年份：2017

卷号：40

期号：1

起止页码：25

中文期刊名：合成纤维工业

外文期刊名：China Synthetic Fiber Industry

收录：CSTPCD

基金：浙江省大学生科技创新项目(2015R428005);浙江省科技厅国际合作项目(2015C34014)

语种：中文

中文关键词：聚丙烯纤维;熔喷无纺布;玻璃纤维;增强;粘合;复合面料;断裂强力

外文关键词：polypropylene fiber; melt blown nonwoven; glass fiber; reinforcement; bonding; composite fabric; breakingstrength

中文摘要：使用OP-450GS开边式粘合机,采用玻璃纤维长丝在不同粘合温度、粘合机压力、粘合速度条件下与聚丙烯(PP)熔喷无纺布进行复合,制备了玻璃纤维增强PP无纺布复合面料,以改善PP熔喷无纺布面料的力学性能及其耐久性。结果表明:最佳复合工艺为粘合温度130℃、粘合速度9 cm/s、粘合机压力1.5MPa、玻璃纤维卷绕密度200根/m;在较佳复合工艺条件下,复合面料的纵向断裂强力为452.48 N,顶破强力为86.35 N,厚度为0.336 mm;复合面料的界面结合力大于PP熔喷无纺布中纤维之间的结合力,玻璃纤维显著增强了复合面料的力学性能。

外文摘要：A glass filament was laminated with polypropylene （PP） melt blown nonwoven to produce a glass fiber reinforced polypropylene （PP） nonwoven composite fabric under different bonding temperature, pressure and speed on an OP-450GS side- open style bonding machine in order to improve the mechanical properties and durability of PP melt blown nonwoven fabric. The results showed that the composited fabric could be produced with the longitudinal breaking strength of 452.48 N, bursting strength of 86.35 N and thickness 0. 336 mm under the optimal laminating process conditions of bonding temperature 130 ℃, speed 9 cm/s and pressure 1.5 MPa and winding density 200 glass fiber per meter; and the composite fabric possessed the inter- face binding force higher than PP melt blown nonwoven, which indicated that the glass filament considerably enhanced the me- chanical properties of the composite fabric.