文献类型：期刊文献

中文题名：熔纺PE/PP复合超细FDY丝的制备工艺

英文题名：The Preparation Process of Melt-Spun PE/PP Composite Ultrafine FDY Filament

作者：毛加冲[1];任天翔[1,2,3,4];许志强[5];葛烨倩[1,2,3,4];徐煜东[6];马金星[7];赵德方[1,2,3,4,8,9];占海华[1,2,3,4]

机构：[1]绍兴文理学院纺织服装学院,浙江绍兴312000;[2]浙江省清洁染整重点实验室,浙江绍兴312000;[3]国家碳纤维工程技术研究中心浙江分中心,浙江绍兴312000;[4]纤维基复合材料国家工程研究中心绍兴分中心,浙江绍兴312000;[5]凯泰特种纤维科技有限公司,浙江绍兴312000;[6]浙江省现代纺织技术创新中心,浙江绍兴312000;[7]绍兴水乡纺织科技有限公司,浙江绍兴312000;[8]浙江大学材料科学与工程学院,浙江杭州310058;[9]海亮集团有限公司,浙江杭州310000

年份：2023

卷号：51

期号：12

起止页码：58

中文期刊名：工程塑料应用

外文期刊名：Engineering Plastics Application

收录：CSTPCD、、CSCD2023_2024、北大核心、CSCD、北大核心2020

基金：浙江省“尖兵”“领雁”研发攻关计划项目(2022C01166);绍兴市“揭榜挂帅”制科技项目(2021B41003);绍兴市技术创新计划项目(2019B22002);浙江省大学生科技创新项目(2021R432020)。

语种：中文

中文关键词：聚乙烯;聚丙烯;皮芯型复合超细FDY丝;纺丝工艺条件;可纺性

外文关键词：polyethylene;polypropylene;skin-core type composite ultrafine FDY filament;spinning process condition;spinnability

中文摘要：采用聚乙烯(PE)和聚丙烯(PP)切片为原料,使用双螺杆挤出机并配以特定的纺丝组件,通过双组分熔体复合纺丝法成功制备了PE/PP皮芯型复合超细全拉伸丝(FDY丝)。为获得高质量的超细FDY丝,对纺丝工艺条件进行了探讨与优化,确定了干燥条件、螺杆温度、纺丝温度、牵伸温度、牵伸倍数、定型温度、卷绕速度等主要工艺参数;并对FDY丝的取向度、力学性能、线密度进行了测试分析研究。结果表明:当PE(皮层)与PP(芯层)质量配比为40∶60时,光学显微镜下复合纤维横的截面形态能呈现出完整且均匀的皮芯型结构;当PE螺杆挤出机各区温度为202,206,206,206,206℃,PP螺杆挤出机各区温度为258,260,260,260,260℃,PE纺丝箱体温度为206℃,PP纺丝箱体温度为248℃时,复合纤维纺丝过程稳定且纤维成型良好;当牵伸温度为60℃、牵伸倍数为4.15倍、定型温度为105℃、卷绕速度为3200 m/min时,FDY丝的可纺性、取向度以及力学性能良好。在最佳纺丝工艺条件下制备的规格为144 dtex/288 f皮芯型复合超细FDY丝能够满足超细纤维对直径和力学性能的要求。

外文摘要：Using polyethylene(PE)and polypropylene(PP)chips resined as raw materials,the PE/PP sheath-core composite ultrafine fully drawn yarn(FDY)was successfully prepared by the dual-component melt composite spinning method,utilizing a twin-screw extruder and specific spinning components.In order to obtain high-quality ultrafine FDY,the spinning process conditions were explored and optimized,including drying conditions,screw temperatures,spinning temperatures,stretching temperatures,stretching ratios,setting temperatures,and winding speeds.Furthermore,the orientation degree,mechanical properties,and linear density of the FDY yarn were tested and analyzed.The results show that when the PE(sheath)to PP(core)ratio is 40∶60,the cross-sectional morphology of the composite fiber under an optical microscope exhibits a complete and uniform sheath-core structure.The spinning process of the composite fiber is stable and the fiber formation is excellent when the PE screw temperatures are set to 202,206,206,206,206℃,the PP screw temperatures are set to 258,260,260,260,260℃,the PE spinning box temperature is set to 206℃,and the PP spinning box temperature is set to 248℃.Moreover,the FDY yarn exhibits good spinnability,orientation degree,and mechanical properties when the stretching temperature is 60℃,stretching ratio is 4.15 times,setting temperature is 105℃,and winding speed is 3200 m/min.The specifications of the sheath-core composite ultrafine FDY yarn prepared under the optimal spinning conditions are 144 dtex/288 f,meeting the requirements for diameter and mechanical properties of ultrafine fibers.