文献类型：期刊文献

英文题名：Influences of monomer compatibility on sizing performance of locust bean gum-g-P(MA-co-AA)

作者：Jin, Enqi[1];Wang, Shuangshuang[1];Song, Chenxi[1];Li, Manli[1]

机构：[1]Shaoxing Univ, Shaoxing, Peoples R China

年份：2022

卷号：113

期号：6

起止页码：1083

外文期刊名：JOURNAL OF THE TEXTILE INSTITUTE

收录：SCI-EXPANDED(收录号：WOS:000803056900001)、、WOS

基金：The work was supported financially by Project of Key Laboratory of Clean Dyeing and Finishing Technology of Zhejiang Province (QJRZ1902) and Technological Research Project for Public Welfare of Zhejiang Province (No. LGG21E030005).

语种：英文

外文关键词：Locust bean gum; graft copolymerization; methyl acrylate; acrylic acid; sizing performance

外文摘要：In order to impart good application performance to locust bean gum (LBG) sizes for polyester yarns, methyl acrylate (MA) and acrylic acid (AA) monomers with a variation in feed molar ratio from 1/9 to 4/6 were grafted onto the molecular chains of native LBG to obtain LBG-g-P(MA-co-AA) products with similar grafting ratios through Fenton redox system. Effects of monomer compatibility of MA and AA on sizing performance of the LBG-g-P(MA-co-AA) were studied in terms of apparent viscosity, contact angle of sizing paste on polyester fibers, water-solubility, mechanical properties of sizing film, and adhesion to polyester fibers. It was found that grafting MA and AA with rational compatibility onto the molecular chains of LBG was an effective method to improve the application performance of the vegetable gelatin sizes, such as good toughness of sizing film and high adhesion to polyester fibers. In view of overall performance of the LBG-g-P(AA-co-MA) sizes, the appropriate feed molar ratio of MA/AA should be 3/7.