文献类型：期刊文献

中文题名：岩石模型结构面的取样代表性试验研究

英文题名：EXPERIMENTAL STUDY OF SAMPLING REPRESENTATIVENESS OF STRUCTURAL PLANE OF ROCK MODEL

作者：黄曼[1];罗战友[2];杜时贵[1]

机构：[1]绍兴文理学院土木工程系;[2]浙江科技学院岩土工程研究所

年份：2013

卷号：32

期号：10

起止页码：2008

中文期刊名：岩石力学与工程学报

外文期刊名：Chinese Journal of Rock Mechanics and Engineering

收录：CSTPCD、、北大核心2011、EI(收录号：20134817040089)、Scopus(收录号：2-s2.0-84888251832)、北大核心、CSCD、CSCD2013_2014

基金：国家自然科学基金资助项目(41172292;41302257);浙江省自然科学基金资助项目(LQ13D020001)

语种：中文

中文关键词：岩石力学;模型结构面;粗糙度系数;非均一性;代表性;取样方法

外文关键词：rock mechanics; structural plane of model： roughness coefficient： nonuniformity representativeness;sampling method

中文摘要：岩石结构面的代表性取样是开展不同尺寸模型结构面直剪试验的前提条件,直接影响到结构面抗剪强度尺寸效应试验结果的有效性和可靠性。通过对取样尺寸为10 cm的18组岩石结构面粗糙度系数(JRC)的测量和统计分析,得到该尺寸岩石结构面试样的粗糙度系数分布规律,表明模型结构面取样代表性评价的必要性。基于结构面粗糙度系数非均一性分布特点,以及对简单随机取样法和分层取样法2种概率取样方法的比较分析,提出基于分层取样法的岩石模型结构面代表性取样方法,该方法采用JRC四分位法确定各层样本的数量比例,再利用分层取样公式计算样本的取样数量。通过岩体结构面抗剪强度的力学机制分析,对试样取样代表性和力学可靠性进行校验,结果表明,采用该取样方法能较好地代表该尺寸的表面形态分布,取样结果也较好地满足力学试验的统计精度要求。

外文摘要：Representative sampling of rock joints is the precondition for direct shear test of the structural plane models with different sizes,which directly affects the effectiveness and reliability of the experimental result of shear strength scale effect. The joint roughness coefficient（JRC） distribution regularity is obtained by analyzing the statistical results of JRC distribution of 18 groups of rock joints with size of 10 cm. The statistical results indicate the necessity of representative evaluation for structural plane models. According to the distribution features of the nonuniformity of JRC,and the comparative analysis between simple random sampling method and stratified sampling method,the representative sampling method of structural plane model based on stratified sampling is proposed. The stratified proportions are determined by the quartile method of JRC. The sampling quantity is calculated through the stratified sampling formula. The sampling representativeness and mechanical reliability are inspected by the mechanical mechanism analysis of rock joints shear strength. The results show that the sampling method can represent the distribution of surface morphology for the certain size;and the sampling result also preferably meets the accuracy requirement of mechanical experiment.