登录    注册    忘记密码

详细信息

Enhanced performance for total Cr removal using a novel h-BN supported nanoscale iron sulfide composite: stabilization effects and removal mechanism  ( SCI-EXPANDED收录 EI收录)   被引量:6

文献类型:期刊文献

英文题名:Enhanced performance for total Cr removal using a novel h-BN supported nanoscale iron sulfide composite: stabilization effects and removal mechanism

作者:Li, Li[1];Chen, Junjie[1];Sheng, Guodong[1];Pan, Yixin[2];Guo, Xiaojie[3]

机构:[1]Shaoxing Univ, Sch Chem & Chem Engn, Shaoxing 312000, Zhejiang, Peoples R China;[2]Shaoxing Univ, Sch Civil Engn, Shaoxing 312000, Zhejiang, Peoples R China;[3]Hangzhou Dianzi Univ, Coll Mat & Environm Engn, Hangzhou 310018, Zhejiang, Peoples R China

年份:2022

卷号:637

外文期刊名:COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

收录:SCI-EXPANDED(收录号:WOS:000763581800004)、、EI(收录号:20220411516103)、Scopus(收录号:2-s2.0-85123249801)、WOS

基金:This study was supported by the Natural Science Foundation of Zhejiang Province under grant number LQ19E030017 .

语种:英文

外文关键词:Hexagonal BN; Chromium; Iron sulfide; Removal efficiency; PH

外文摘要:In this study, a novel nanocomposite (FeS@h-BN) that FeS nanoparticles anchored onto h-BN nanosheets was synthesized for chromium (Cr(VI)) removal in aqueous solutions and characterized by SEM, TEM, XRD, FTIR, Zeta, and XPS. The effect of removal parameters including initial pH, temperature, FeS@h-BN dosage, the initial concentration of Cr(VI) and contact time were investigated. Experiment results revealed that h-BN as a stabilizer for FeS had good stability and effectively reduced FeS agglomeration. The remarkable performance of removing total Cr in aqueous solution was obtained by effectively converting Cr(VI) to Cr(III) on FeS and simultaneously adsorbing Cr(III) on h-BN. The adsorption capacity of FeS@h-BN for Cr(VI) was extremely sensitive to the pH and the optimum adsorption was 399.72 mg/g at pH of 1.0. In addition, the efficiency of removing Cr(VI) by FeS@hBN increased with the increase of adsorbent dosage and Cr(VI) concentration, and the efficiency reached 100% at an adsorbent dosage of 0.30 g/L. The pseudo-second-order kinetic model can fully explain the experimental rate data. The mechanism of FeS@h-BN to remove Cr(VI) was adsorption and chemical reduction, of which chemical adsorption was the main one. These results revealed that h-BN as a stabilizer can improve the FeS stability and reactivity for the rapid removal of Cr(VI) contamination in water solution.

参考文献:

正在载入数据...

版权所有©绍兴文理学院 重庆维普资讯有限公司 渝B2-20050021-8
渝公网安备 50019002500408号 违法和不良信息举报中心