| Automatic identification and characterization of discontinuities in rock masses from 3D point clouds | Kong, Deheng[1];Wu, Faquan[1,2 | ENGINEERING GEOLOGY | 112 | |
| Microstructural constraints on geotechnical properties of Malan Loess: A case study from Zhaojiaan landslide in Shaanxi province, China | Luo, Hao[1];Wu, Faquan[2];Chan | ENGINEERING GEOLOGY | 93 | |
| Development and application of UAV-SfM photogrammetry for quantitative characterization of rock mass discontinuities | Kong, Deheng[1];Saroglou, Char | INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES | 75 | |
| Seismic amplification of the anti-dip rock slope and deformation characteristics: A large-scale shaking table test | Yang, Guoxiang[1];Qi, Shengwen | SOIL DYNAMICS AND EARTHQUAKE ENGINEERING | 57 | |
| ARMR, a new classification system for the rating of anisotropic rock masses | Saroglou, Charalampos[1,2];Qi, | BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT | 49 | |
| A New Dynamic Direct Shear Testing Device on Rock Joints | Qi, Shengwen[1,2,3];Zheng, Bow | ROCK MECHANICS AND ROCK ENGINEERING | 42 | |
| Excavation damaged zone division and time-dependency deformation prediction: A case study of excavated rock mass at Xiaowan Hydropower Station | Bao, Han[1];Zhang, Keke[1];Yan | ENGINEERING GEOLOGY | 38 | |
| Advances in statistical mechanics of rock masses and its engineering applications | Wu, Faquan[1];Wu, Jie[2];Bao, | JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING | 35 | |
| Stress-strain relationship in elastic stage of fractured rock mass | Wu, Faquan[1];Deng, Yi[1];Wu, | ENGINEERING GEOLOGY | 27 | |
| In-Situ Block Characterization of Jointed Rock Exposures Based on a 3D Point Cloud Model | Kong, Deheng[1];Wu, Faquan[1,2 | REMOTE SENSING | 17 | |
| Quantitative assessments on fluid flow through fractures embedded in permeable host rocks: Experiments and simulations | Zhong, Zhen[1,2];Meng, Xing[1] | ENGINEERING GEOLOGY | 13 | |
| Study on Dynamic Characteristics of Diorite Under Dry-Wet Cycle | Xu, Jiangbo[1];Sun, Haohui[1]; | ROCK MECHANICS AND ROCK ENGINEERING | 13 | |
| Assessment and prevention on the potential rockfall hazard of high-steep rock slope: a case study of Zhongyuntai mountain in Lianyungang, China | Ji, Zhong-Min[1,2];Chen, Tian- | NATURAL HAZARDS | 12 | |
| A Recognition and Geological Model of a Deep-Seated Ancient Landslide at a Reservoir under Construction | Qi, Shengwen[1,2];Zou, Yu[1,2] | REMOTE SENSING | 12 | |
| Anisotropic creep behavior of soft-hard interbedded rock masses based on 3D printing and digital imaging correlation technology | Tian, Yun[1,2];Wu, Fa-Quan[1,2 | JOURNAL OF MOUNTAIN SCIENCE | 11 | |
| Effects of test procedures and lithology on estimating the mode I fracture toughness of rocks using empirical relations | Bao, H.[1];Wu, F. Q.[2];Niu, J | MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK | 10 | |
| Laboratory investigation of the effect of the rotational speed on the coefficient of restitution | Ji, Zhong-Min[1];Hu, Sheng-Min | ENGINEERING GEOLOGY | 9 | |
| New failure criterion for rock slopes with intermittent joints based on energy mutation | Zhou, Yu[1];Lv, Wenjun[1];Zhou | NATURAL HAZARDS | 9 | |
| A new method for assessing slope unloading zones based on unloading strain | Bao, Han[1];Wu, Faquan[2];Xi, | ENVIRONMENTAL EARTH SCIENCES | 9 | |
| Frictional strength and sliding behaviors of an analogue rock-fault structure: A laboratory study | Zhong, Zhen[1,2];Xu, Congqiang | INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES | 8 | |
| Study on shear strength characteristics of loess dam materials under saturated conditions | Xu, Jiangbo[1];Wei, Wei[1];Bao | ENVIRONMENTAL EARTH SCIENCES | 8 | |
| An Extended Hyperbolic Closure Model for Unmated Granite Fractures Subject to Normal Loading | Li, Bo[1];Mo, Yangyang[2];Zou, | ROCK MECHANICS AND ROCK ENGINEERING | 8 | |
| Research on Rock Strength Test Based on Electro-Hydraulic Servo Point Load Instrument | Zhou, Xiaoxia[1];Qiao, Lei[1]; | APPLIED SCIENCES-BASEL | 7 | |
| Evolution of tensile strength and cracking in granite containing prefabricated holes under high temperature and loading rate | Zhong, Xia[1];Xu, Jiangbo[1];S | GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES | 7 | |
| Comparison and combination of Leeb hardness and point load strength for indirect measuring tensile and compressive strength of rocks | Guan, Shenggong[1];Cao, Runqin | BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT | 3 | |
| Interaction of two offset parallel flaws in geomaterials under unloading conditions | Zhou, Yu[1,7];Zhou, Zihan[2];S | THEORETICAL AND APPLIED FRACTURE MECHANICS | 3 | |
| Investigation of 3D Printing Sand Core Technology on the Mechanical Behaviors of Soft-Hard Interbedded Rock Masses | Tian, Yun[1];Wu, Faquan[1];He, | JOURNAL OF MATERIALS IN CIVIL ENGINEERING | 2 | |
| Research on Point Load Correction Factor Based on Electro-hydraulic Servo Point Load Meter | Qiao, Lei[1,2];Wu, FaQuan[1,2] | ROCK MECHANICS AND ROCK ENGINEERING | 1 | |
| Aluminum foam as buffer layer used in soft rock tunnel with large deformation | Wu, Faquan[1,2];Miao, Binxin[1 | JOURNAL OF MOUNTAIN SCIENCE | 1 | |
| Study on low content short carbon fibers to enhance mechanical properties of ZrB2-SiC composites with improved damage tolerance | He, Linkai[1,5];Wu, Jinhao[2]; | MATERIALS TODAY COMMUNICATIONS | 0 | |
渝公网安备 50019002500408号 违法和不良信息举报中心
