| Practices, experience, and lessons learned based on field observations of support failures in some Chinese coal mines | Feng, Xiaowei[1];Zhang, Nong[1 | INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES | 43 | |
| Experimental study of rock burst in coal samples under overstress and true-triaxial unloading through passive velocity tomography | Zhu, Guang-an[1,2];Dou, Lin-mi | SAFETY SCIENCE | 41 | |
| Identification of crack development in granite under triaxial compression based on the acoustic emission signal | Wang, Tianzuo[1,2];Wang, Linxi | INTERNATIONAL JOURNAL OF DISTRIBUTED SENSOR NETWORKS | 25 | |
| Characterization of 3D printed bolts based on digital image correlation and infrared thermography | Feng, Xiaowei[1];Xue, Fei[2] | MATERIALS & DESIGN | 20 | |
| REInforcing effects of 3D printed bolts on joint-separated standard soft rock specimens | Feng, Xiaowei[1];Xue, Fei[2];W | COMPOSITES PART B-ENGINEERING | 20 | |
| Experimental study on effects of cyclic loading paths on cracking behavior and fracture characteristics of granite | Xue, Fei[1];Lin, Zhongqin[1];W | ENGINEERING FRACTURE MECHANICS | 19 | |
| Acoustic Emission Characteristics and Energy Evolution of Red Sandstone Samples under Cyclic Loading and Unloading | Wang, Tianzuo[1,2,3];Wang, Chu | SHOCK AND VIBRATION | 15 | |
| fatigue deformation and damage characteristics of bolting system under stress-controlled cyclic pullout | Xue, Fei[1,2,3];Zhao, Tongyang | CONSTRUCTION AND BUILDING MATERIALS | 13 | |
| Experimental study on cracking process and fracture properties of granite under mode I loading by acoustic emission and digital image correlation | Xue, Fei[1];Lin, Zhongqin[1];W | FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 12 | |
| Mechanical performance of a 3D printed scaled mine roadway model | Feng, Xiaowei[1,3];Xue, Fei[2] | INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES | 10 | |
| A novel rock bolting system exploiting steel particles | Feng, Xiaowei[1,2];Xue, Fei[3] | INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY | 8 | |
| Mechanical damage characteristics and acoustic emission characteristics of a bolt-slurry interface under cyclic pull-out loading | Zhao, Tongyang[1];Huang, Wanpe | CONSTRUCTION AND BUILDING MATERIALS | 7 | |
| Re-think of solving the gloving problem in bolting systems by adulterating steel particles | Feng, Xiaowei[1];Xue, Fei[2];J | CONSTRUCTION AND BUILDING MATERIALS | 6 | |
| Experimental Investigation on the Effect of Volume Loss on Ground Movements Induced by Tunnelling in Sand | Wang, Tianzuo[1];Wang, Ruipeng | KSCE JOURNAL OF CIVIL ENGINEERING | 4 | |
| Spatial and Temporal Distribution Law and Influencing factors of the Mining-Induced Deformation and failure of Gas Boreholes | Xue, Fei[1,2];Feng, Xiaowei[3] | ADVANCES IN MATERIALS SCIENCE AND ENGINEERING | 4 | |
| Anisotropic Mechanical Behavior of Stratified Sandstone Subjected to Cyclic Loading | Xue, Fei[1];Zhao, Tongyang[1,2 | LITHOSPHERE | 4 | |
| 基于3D打印和数字散斑技术的节理岩体锚固效应分析 | 薛飞[1];刘小霞[1];王天佐[1] | 《采矿与岩层控制工程学报》 | 3 | |
| Experimental study on anchorage mechanical effect of rock bolts on cross-jointed rock mass using DIC and AE | Xue, Fei[1];Tong, Zhuoya[1];Ch | THEORETICAL AND APPLIED FRACTURE MECHANICS | 3 | |
| Combining SfM and deep learning to construct 3D point cloud models of shield tunnels and Realize spatial localization of water leakages | Qian, Jinhua[1];Xue, Fei[1];Wa | MEASUREMENT | 1 | |
| 内置等强缩尺3D打印支护系统的矿山相似物理模拟试验研究 | 冯晓巍[1];汪明坤[1];薛飞[2];赵 | 《中国矿业大学学报》 | 0 | |
| 单轴压缩试验端面摩擦效应及损伤演化规律研究 | Li, Shanlin[1]; Liu, Guangjian | [1] Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province, School of Civil Engineering, Shaoxing University, Shaoxing, 312000, China | 0 | |
| Thermal Damage Impact on Negative Poisson's Ratio of Granite Under Brazilian Tensile Loading | Wang, Tianzuo[1]; Wang, Jisha[ | SSRN | 0 | |
| 不同围岩刚度条件下锚杆的锚固性能与失效机制研究 | 薛飞[1,2];林锺钦[1,2,3];尉伟峰 | 《采矿与岩层控制工程学报》 | 0 | |
| Experimental investigation of lithology-dependent response to loading rate in rock fracture: From microcracking mechanisms to macroscopic fracture characteristics | Xue, Fei[1,2]; Zhou, Xin[1,2]; | Theoretical and Applied Fracture Mechanics | 0 | |
| failure Characteristics of W Straps Based on Field Observations and Laboratory Tests | Feng, Xiaowei[1]; Xue, Fei[2]; | ResearchSquare | 0 | |
| A case study of determining the safety threshold of blasting vibration for tunnel lining | Xia, C. C.[1,2];Xue, F.[1,2];G | ROCK DYNAMICS - EXPERIMENTS, THEORIES AND APPLICATIONS | 0 | |
| 基于金属粉末的3D打印煤巷锚杆基本力学性能与应用研究 | 冯晓巍[1];薛飞[2];宋万新[3] | 《中国矿业大学学报》 | 0 | |
| Karst development characteristics and collapse risk assessment along Shaoxing metro line 1 | Huang, Jiandong[1]; Xue, Fei[2 | IOP Conference Series: Earth and Environmental Science | 0 | |
| Mechanical Modification of Resin Capsules by Adding Steel Particles | Feng, Xiaowei[1];Xue, Fei[2];Z | SHOCK AND VIBRATION | 0 | |
| Thermal Damage Impact on Negative Poisson's Ratio of Granite Under Brazilian Tensile Loading | Wang, Tianzuo[1];Wang, Jisha[1 | FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 0 | |
渝公网安备 50019002500408号 违法和不良信息举报中心
